Screen Mount Options
Multiple options available for any application.
Quickly jump to the content you are interested in:
Panel Top Cap Mounts
Adding height to existing stations does not require a complete reconfigure of a system. Our Panel Top Cap mounts make it easy to add a glass, fabric or PET mullion screen to a panel top cap with minimal installation needed.
Recommended Use
Add permanent height to a shorter panel system
- Secured by drilling hole in the panel top cap
- Screen is pressure fit into mount, no
holes required in the screen - 1/2” gap between screen and top cap
Recommended Use
Easy to move bracket adds height to shorter panel system
- Secured via tension screw below top cap edge
- Screen can be moved and adjusted along top cap
- Screen is pressure fit into mount, no
holes required in the screen - 1/2” gap between screen and top cap
Recommended Use
Affords minimal gap between screen and top cap – COVID-19 applications
- Secured by pressure fit over a standard panel top cap
- Screen can be moved and adjusted
- Screen requires a hole to secure to mount
- Bottom of screen has minimal gap
May only be used with plexiglass
Recommended Use
Affords minimal gap between screen and top cap – COVID-19 applications
- Secured by pressure fit over a standard panel top cap
- Screen requires a hole to secure to mount
- Bottom of screen has minimal gap
- May only be used with plexiglass
- Available in six standard OPS paint colors
- Available in Silver finish
Work Surface Mounts
Adding division among work surfaces is a key way to increase the privacy of a work station while maintaining a collaborative environment.
Recommended Use
Add permanent divider to work surface
- Secured by drilling hole in the work surface top or bottom (for modesty panel)
- Recommended as a permanent solution on a system
- Screen is pressure fit into mount, no holes required in the screen
- 1/2” gap between screen and surface
Recommended Use
Add permanent divider to work surface edge
- Secured by drilling hole on the underside of work surface
- Recommended as a permanent solution on a system
- Used on the outside edge of a work surface or mounted between two surfaces (8mm gap)
- Screen is pressure fit into mount, no holes required in the screen
- 1/2” gap between screen and surface
Recommended Use
Add permanent divider between work surfaces
- Secured by drilling hole on the underside of adjoining work surfaces
- Recommended as a permanent solution on a system
- Used to mount a screen between two surfaces (5mm gap)
- Screen is pressure fit into mount, no holes required in the screen
- 1/2” gap between screen and surface
Recommended Use
Clamp style mount allows screen to easily be moved as needed
- Secured by clamp style mount
- Screen can be moved and adjusted
- Screen is pressure fit into mount, no holes required in the screen
- 1/2” gap between screen and surface
Freestanding Mounts
For work areas that need temporary screens or dividers that can easily be moved, our selection of Freestanding options provide optimal flexibility.
Recommended Use
For screens that need to frequently be re-positioned or temporarily used
- Freestanding base sits on surface
- Bottom of base is felt lined
- Screen can be moved and adjusted
- Screen is pressure fit into mount, no holes required in the screen
- 1/2” gap between screen and top cap
Recommended Use
Movable screen that has minimal gap between screen and surface – COVID-19 applications
- Freestanding base sits on surface
- Bottom of base is felt lined
- Screen can be moved and adjusted
- Screen requires hole to secure to mount
- Bottom of screen has minimal gap
Desk Screen Dividers
Our Desk Screen Dividers are ideal for freestanding or standalone stations with an exposed work surface edge. A single screen reaches above and below a work surface, serving as a space divider and modesty panel.
Recommended Use
Adds space divider and modesty panel in one screen to standalone desks
- Adds screen height above and below a work surface
- Secured by drilling hole in the work surface underside
- Recommended as a permanent solution on a system
- Screen is secured to bracket with a round threaded connector
- MDF Fabric screens only, Grade 1 and Grade 2 fabrics available
- T-molding available in BU, MT, WF
For more information on our fabric Desk Screen Dividers, please click here.
Recommended Use
Add two or three-sided enclosure to standalone desks
- Adds screen height above and below a work surface
- Secured by clamp mounts underneath work surface
- Provides (2) or (3) sided enclosure to station
- 24mm PET board required for DSH-L holders.
For more information on our DSH Desk Screen Dividers, please click here.
Desk/Panel Mounts for Glass & Plexiglass
Our desk/panel mounts are designed for tempered glass and plexiglass and can connect to panels or work surfaces. Available in 2, 3 and 4-Way connectors, providing maximum flexibility for work areas that need quick barrier solutions.
DM-2W
Recommended Use
Connecting two (2) glass screens at 90° angle
DM-3W
Recommended Use
Connecting three (3) glass screens at 90° angles
DM-4W
Recommended Use
Connecting four (4) glass screens at 90° angles
DM-SE
Recommended Use
Used at middle or end of glass screen run
DM-RE
Recommended Use
Used at middle or end of glass screen run
- Designed for tempered glass or plexiglass applications
- Recommended for heights up to 20″H
- Can attach to panels or work surfaces
- Secures to surfaces using double-sided tape, velcro, or screws
- Minimal gap (~1/8”) from edge of screen to surface
- Bottom and top mounts are required to secure glass
Gallery
Resources
Resource Downloads
Screen Mount & Finishes Flyer
DM Mount Specification Guide
Desk Screen Dividers Flyer
Desk Screen Dividers L/LU Flyer
Screen Mount Comparison Sheet
Screen Mount Grip/Thickness Guide
Mount Specifications
PGHM-UP
PGHM-TC
PGHM-N
PGHM-UC
PGHM-UFS
PGHM-UT
Mount Assembly
PGHM
PGHM-TC
PGHM-N
PGHM-UC
PGHM-UFS
PGHM-UT
DSH-L\DSH-LU